178
Direct Printing
4
Connect your camera to a printer using the USB cable provided.
1
Make sure that the camera is off.
2
Open the terminal cover.
3
Connect your camera to a
printer using the USB cable
provided.
• Your camera turns on automatically.
• Turn on the printer if it is not already on.
Caution------------------------------------------------------------------------------------------
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
Note ----------------------------------------------------------------------------------------------
To disconnect the camera from the printer, check that the camera is turned off after
printing is finished, and disconnect the USB cable.
Connecting the Camera to a Printer
To Next Page
Loading...
