Ricoh GX200 VF KIT - Using the Shutter Release Button to Set a Setting in ADJ. Mode (ADJ Shutter); On; Off *Default setting

199
Changing Camera Settings
5
You can change the operation sound volume.
To change the operation sound volume, follow the steps below.
1 Display the setup menu.
• For the operating procedure, see P.184.
2 Press the " button to select [Vol. Settings] and press
the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
The level sound is not emitted, even when [Level Setting] is set to [Disp + Snd] or [Sound]
and [Vol. Settings] is set to [
  ] (Mute) (GP.202).
Changing the Operation Sound
Volume (Vol. Settings)
Available Settings
   (Mute)
   (Small)
   (Medium) *Default setting
   (Large)