85
Various Shooting Functions
1
This function allows you to shift the target for the automatic exposure
(AE) and/or the auto focus (AF) without having to move the camera
when taking a picture. This function is the same as the ADJ. lever’s
AE/AF target shift function. For more information, see P.75.
1
Set [Set Fn1/2 Button] to [MoveTarget] on the setup
menu.
• For the operating procedure, see P.195.
2
With the camera ready to shoot, press the Fn1/Fn2
button.
• The target shift screen appears.
3
Press the !"#$ buttons or
press the ADJ. lever left or
right to move the cross-mark
to the desired target position.
4
Press the DISP. button.
5
Press the !" buttons to
select the desired setting, and
then press the ADJ. lever or
the MENU/OK button.
• See P.75 for details about individual
settings.
• The target shift screen appears again.
• If [Off] is selected, the display returns
to the shooting screen.
6
If the cross-mark is aligned with the desired target
position, press the MENU/OK button.
• Move the cross-mark if it is not aligned properly.
Shifting the AE and AF Targets
Select Ok
Ok
OFF
AE/AF
AF
AE
To Next Page
Loading...
