Ricoh GX200 VF KIT - Changing the RAW Mode JPEG Image Setting (RAW;JPEG Setting)

212
Changing Camera Settings
5
When shooting with [Pic Quality/Size] set to RAW mode
(GP.105), a JPEG file associated with the RAW format file (.DNG
file) is recorded at the same time. You can change the picture
quality and image size of this JPEG file.
To change the picture quality and image size settings of the JPEG
file, follow the steps below.
1 Display the setup menu.
• For the operating procedure, see P.184.
2 Press the " button to select [RAW/JPEG Setting] and
press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button.
Changing the RAW Mode JPEG Image
Setting (RAW/JPEG Setting)
Available Settings Description
Fine
*Default setting
Picture quality: Fine mode; Image size: Recorded at the same
size as the RAW format file.
Normal Picture quality: Normal mode; Image size: Recorded at the
same size as the RAW format file.
N640 Picture quality: Normal mode; Image size: Recorded at
640 × 840. However, image size is recorded at 640 × 424 (3:2)
for [RAW3:2] and 480 × 480 (1:1) for [RAW1:1].