EasyManua.ls Logo

Ricoh GX200 VF KIT - Using the Zoom Function

Ricoh GX200 VF KIT
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
If you are using the camera for the first time, read this section.
1
With the camera ready to
shoot, press the z or Z
button.
You can check the zoom status on
the zoom bar of the picture
display.
2
Compose your picture and
half-press the shutter release button.
3
Full-press the shutter release button.
Using the Digital Zoom -------------------------------------------------------------------------
Digital zooming enables you to enlarge the subject more than the maximum
magnification of the optical zoom (3.0×) specified by pressing the z button (up to
4.0×).
To use digital zooming, press and hold the z button until the maximum magnification
is reached on the zoom bar, then momentarily release the button, and then press the
z button again.
If [Pic Quality/Size] is set to 4000 × 3000, you can also set [Digital Zoom Img] to [Auto
Resize]. (GP.204)
This function is not available when [Pic Quality/Size] is set to RAW mode. (GP.105)
Note ---------------------------------------------------------------------------------------------------
You can also set the focal length of the zoom so that it stops at five levels. (GP.193)
Using the Zoom Function
Pressing the z (Telephoto) button allows you to take a close-up
picture of the subject.
Pressing the Z (Wide-angle) button allows you to take a wide-
angle picture.
Wide-angle Telephoto

Table of Contents

Related product manuals