Ricoh GX200 - Registering Custom Settings (Reg. My Settings)

191
Changing Camera Settings
5
The My Settings function allows you to easily shoot with your
desired settings.
You can register three groups of settings as “My Settings”. Setting
the mode dial to MY1 allows you to shoot with the settings
registered in [MY1]. Setting the mode dial to MY2 or MY3 allows you
to shoot with the settings registered in [MY2] or [MY3]. (GP.99)
To register the current camera settings as My Settings, follow the
steps below.
1 Change the camera settings to the values you want to
register as My Settings.
2 Display the setup menu.
• For the operating procedure, see P.184.
3 Press the " button to select
[Reg. My Settings] and press the
$ button.
• A confirmation message appears.
4 Select the setting, and then
press the MENU/OK button.
• The current camera settings are
registered and the display returns to
the setup menu.
• If you do not want to register them,
press the DISP. button.
5 Press the MENU/OK button.
Registering Custom Settings
(Reg. My Settings)