Ricoh GX200 - Switching between Auto Focus and Snap Mode (Af;Snap)

81
Various Shooting Functions
1
Assigning the Fn1/Fn2 button to [AF/Snap] (GP.195) and then
pressing the Fn1/Fn2 button during shooting allows you to switch
between auto focus (AF) and Snap. Pressing the Fn1/Fn2 button
switches between auto focus and manual focus depending on the
[Focus] setting on the shooting menu (GP.108), as shown below.
* The last selected AF mode ([Multi AF] or [Spot AF]) is selected.
1 Set [Set Fn1/2 Button] to [AF/Snap] on the setup menu.
• For the operating procedure, see P.195.
2 With the camera ready to
shoot, press the Fn1/Fn2
button.
• When the focus mode changes to
snap mode, the [Snap] symbol
appears at the upper right of the
screen.
• When the focus mode changes to
auto focus ([Multi AF] or [Spot AF]),
the [Snap] symbol disappears.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [MF] or [A] (GP.108), pressing the Fn1/Fn buttons does not
switch AF/Snap.
Note ----------------------------------------------------------------------------------------------
You can also use the shooting menu to make the [Focus] setting. (GP.108)
Switching Between Auto Focus and Snap Mode
(AF/Snap)
[Focus] setting Press the Fn1 or Fn2 button
Multi AF Switches between [Snap] and [Multi AF]
Spot AF Switches between [Snap] and [Spot AF]
Snap Switches between [Multi AF] or [Spot AF]
*
and [Snap]