Ricoh GX200 - Shooting with an Combined Aperture Value and Shutter Speed (P: Program Shift Mode)

92
Various Shooting Functions
1
Setting the mode dial to P (program shift mode) allows you to shoot
with a set combination of the aperture value and shutter speed.
Use the up-down dial to set the program shift mode.
1 Turn the mode dial to P.
• The mode symbol appears on the
picture display.
2 Half-press the shutter release
button.
• The current combination of the
aperture value and shutter speed
appear on the screen.
3 Release your finger from the
shutter release button.
4 Rotate the up-down dial to
select the combination of the
aperture value and shutter
speed.
• The combination of the aperture value
and shutter speed are displayed for 10
seconds. Rotate the up-down dial
during that time to change the
combination of the aperture value and
shutter speed.
5 Press the shutter release button to shoot the picture.
Shooting with an Combined Aperture
Value and Shutter Speed
(P: Program Shift Mode)
P
F2.5
F2.5
1 / 30
1 / 30
P
F3.2
F3.2
1 / 80
1 / 80