Message Causes Solutions
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• In [Printer Features], under [Host
Interface], select [I/O Buffer], and
then set the maximum buffer size to
a larger value.
• Reduce the number of files being
sent to the machine.
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
Integration Server
authentication was already
registered in
a different server
with a different ID, and a
duplication of the user name
occurred due to a switching
of domains (servers), etc.
Contact the administrator.
"No response from the server.
Authentication has failed."
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
Check the status of the server.
"Output tray has been
changed."
The output tray was changed
because the
paper size of the
specified output tray is
limited.
Specify the proper output tray.
"Print overrun." Images were discarded while
printing.
On the printer driver's [Detailed Settings]
tab, click [Print Quality] in the "Menu:",
and then
select a lower resolution in the
"Resolutions:" list.
"Printing privileges have not
been set for this document."
The PDF document you have
tried to
print has no privileges
to print.
Contact the owner of the document.
"Selected ppr. size is not
supported. Job was
cancelled."
Job reset is automatically
performed if the specified
paper size is incorrect.
Specify the correct paper size, and then
print the file again.
Messages Displayed When Using the Printer Function
47
To Next Page
Loading...
