Problem Causes Solutions
Misfeeds occur frequently. The cut paper tray's side
fences are set too tightly.
Push the side fences lightly, and then
reset it.
Misfeeds occur frequently. The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity conditions. For details about
the proper way to store paper, see
"Paper Storage", About This Machine
.
Misfeeds occur frequently. The paper is too thick or too
thin.
Use recommended paper. For details
about recommended paper, see
"Recommended Paper Sizes and
Types", About This Machine .
Misfeeds occur frequently. The paper is wrinkled or has
been folded/creased.
• Use recommended paper. For
details about recommended
paper, see "Recommended Paper
Sizes and Types", About This
Machine .
• Use paper that has been stored in
the recommended temperature
and humidity conditions. For
details about the proper way to
store paper, see "Paper Storage",
About This Machine .
Misfeeds occur frequently. Printed paper is being used. Do not load sheets that have already
been copied
or printed onto by another
machine.
Misfeeds occur frequently. Sheets are sticking together. Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Copy paper becomes
creased.
The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity conditions. For details about
the proper way to store paper, see
"Paper Storage", About This Machine
.
Other Printing Problems
57
To Next Page
Loading...
