1
13
Introduction
You can change the type of information displayed in standby
mode by pressing G while the control panel is displayed.
Use CD to select the type and press E.
When shooting with the viewfinder
When shooting with Live View
Shooting Info Display
Status
Screen
Displays the settings for shooting with the
viewfinder. (p.10)
Electronic
Level
Displays the camera
angle.
A bar scale indicating
the horizontal camera
angle appears at the
bottom of the screen,
and a bar scale
indicating the vertical
camera angle appears
on the right side. When the angle exceeds the
range that can be displayed in the scale,
the indicators on the scale are displayed in red.
Display Off Nothing is displayed on the monitor.
Electronic
Compass
Turns on the GPS
function and displays
the current latitude,
longitude, altitude, lens
direction, and
Coordinated Universal
Time (UTC).
Standard
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.11)
No
Information
Display
Certain icons, such as those for the exposure
mode and drive mode, are not displayed.
When the Camera is Held Vertically
When the camera is rotated to the vertical
position, the status screen and control
panel are displayed in a vertical position.
To not display images in the vertical
position, set [Auto Screen Rotation]
to S (Off) in [LCD Display] of the
D1 menu. (p.25)
To Next Page
Loading...
