6
91
Appendix
The Shake Reduction function operates by obtaining the lens
information such as focal length. Set the focal length when
using a lens that the focal length information cannot be
automatically obtained.
1 Set [26. Using Aperture Ring] to [Enable]
in the E4 menu.
2 Turn the camera off.
3 Attach a lens to the camera and turn the camera on.
The [Input Focal Length] screen appears.
4 Use AB to set the focal
length.
Press C to select a value from
the list.
When using a zoom lens, select
the actual focal length which the
zoom is set to.
5 Press E.
The camera returns to standby mode.
t Memo
• The focal length setting can be changed in [Input Focal
Length] of the A3 menu.
Use of the following external flashes (optional) enables a variety
of flash modes, such as P-TTL auto flash mode.
x: Available #: Restricted
×
: Not available
*1 Available only when using a DA, DA L, D FA, FA J, FA, F, or A lens.
*2 AF assist light is not available with the AF540FGZ or AF360FGZ.
*3 Shutter speed of 1/90 seconds or slower.
*4 Not available with the AF200FG or AF160FC.
*5 Multiple AF540FGZ, AF540FGZ II, AF360FGZ, or AF360FGZ II units
are required.
*6 Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II.
Setting the Focal Length
A3
mm
Functions when Using an External
Flash
Compatible Flash
Camera Function
AF540FGZ
AF540FGZ II
AF360FGZ
AF360FGZ II
AF201FG
AF200FG
AF160FC
Red-eye reduction flash
xx
Auto Flash Discharge x
*1
x
*1
Automatic switch to the flash sync speed
xx
Automatic setting of the aperture value in
G or I mode
x
*1
x
*1
P-TTL auto flash x
*1
x
*1
Slow-speed Sync flash
xx
Flash Exposure Compensation
xx
AF assist light of the external flash x
*2
×
Trailing Curtain Sync flash
*3
x
#
*4
Contrast-control-sync flash x
*5
#
*6
Slave flash x
*5
×
High-speed Sync flash
x
×
Wireless flash x
*5
×
e_kb570_om.book Page 91 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
