Ricoh Pentax K-3 II - How to Change Function Settings

1
Introduction
16
Use AB to switch between the brightness histogram and RGB
histogram.
When shooting with the viewfinder, the following information
appears in the viewfinder.
t Memo
• The information is displayed in the viewfinder when the
shutter release button is pressed halfway, or during the meter
operating time (default setting: 10 sec.).
Histogram Display
1 Histogram (Brightness)
2 Switch RGB histogram/
Brightness histogram
3 Protect setting
4 Card slot number in use
5 Folder number-File
number
6 Save RAW Data
7 File Format
8 Shutter speed
9 Aperture value
10 Sensitivity
11 EV Compensation
12 Histogram (R)
13 Histogram (G)
14 Histogram (B)
100-0001
100-0001
100-0001
100-0001
1/
2000
1/
2000
F2.8
F2.8
200
200
+0.3
+0.3
1/
2000
1/
2000
F2.8
F2.8
200
200
+0.3
+0.3
145
6
32
12
13
14
7 8 9 10 11
45326
7 8 9 1110
1
Brightness histogram
AB
RGB histogram
Viewfinder
1 AF frame (p.36) 12 AE Lock
2 Spot metering frame
(p.44)
13 Change AF Point (p.47)
14 Multi-exposure (p.53)
3 AF point (p.47) 15 AE Metering (p.44)
4 Flash indicator (p.45) 16 Shake Reduction
5 Focus Method (p.46) 17 Flash Exposure
Compensation (p.45)
6 Shutter speed
7 Aperture value 18 EV Compensation
(p.41)/Exposure
Bracketing (p.52)
8 Focus indicator
9 EV bar scale/Electronic
Level (p.17)
19 File Format (p.39)
10 ISO/ISO AUTO
11 Sensitivity (p.43)/
Exposure compensation
value
1
4
19
181716151413
61011
12
2
1
3
5 7 8 9
e_kb570_om.book Page 16 Friday, May 8, 2015 4:55 PM