3
Shooting
58
When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.
1 Press D in standby mode.
The Custom Image setting screen appears.
2 Select an image finishing
tone.
Available operations when shooting with the viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The camera returns to standby mode.
u Caution
• This function is not available when in T mode.
• The Digital Preview operation in Step 2 cannot be performed
when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
Controlling the Image Finishing
Tone
Custom Image
Bright (default setting)
Natural
Portrait
Landscape
Vibrant
Radiant
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Main switch to U Uses Digital Preview to preview
the background image with the
selected setting applied.
H
Saves the preview image (only
when the image can be saved).
Check
AB
Selects a parameter.
CD
Adjusts the value.
Q
Switches between [Contrast], [Highlight
Adjustment], and [Shadow Adjustment].
R
Switches between [Sharpness], [Fine
Sharpness], and [Extra Sharpness].
(Not available in C mode).
M
Resets the adjustment value to the default
setting.
To Next Page
Loading...
