3
Shooting
59
The outcome of Cross Processing varies each time a picture
is taken. If you take a cross processed image that you like,
you can save the Cross Processing settings used in the image
so that you can repeatedly use the same settings.
1 Press B in single image display of playback mode.
The playback mode palette appears.
2 Select a and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select the “Favorite” number 1, 2 or 3 to save the
settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.58), and selecting one of the Favorite settings 1 to 3 for the
parameter.
1 Select [Digital Filter] in A1 or C1 menu and
press D.
The Digital Filter setting screen appears.
2 Select a filter.
Select [No Filter] to not shoot with
a digital filter.
Available operations when shooting with the viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
3 Press G.
The parameter setting screen appears.
Saving the Cross Processing Settings of a Captured
Image
Cancel
Digital Filter
A1/C1/v
Extract Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Main switch to U Uses Digital Preview to preview
the background image with the
selected effect applied.
H
Saves the preview image (only
when the image can be saved).
To Next Page
Loading...
