4
Playback
74
1 Display the image to edit in single image display.
2 Select T in the playback mode palette.
The screen to select a filter appears.
3 Select a filter.
Use Q to select a different
image.
Proceed to Step 7 if you do not need to change the
parameters.
4 Press G.
The parameter setting screen appears.
5 Set the parameters.
Available operations
6 Press E.
The screen of Step 3 reappears.
7 Press E.
The save confirmation screen appears.
8 Select [Apply additional filter(s)], [Save to SD1],
or [Save to SD2], and press E.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of
Step 3 reappears.
u Caution
• Only JPEG and RAW images captured with this camera can
be edited with the digital filters.
• RAW images captured using HDR Capture or Pixel Shift
Resolution cannot be processed with Digital Filter.
t Memo
• Up to 20 filters, including the digital filter used during shooting
(p.59), can be applied to the same image.
Retrieves the filter effects of the selected image and applies the
same filter effects to other images.
1 Display a filter-processed image in single image
display.
2 Select T in the playback mode palette.
Processing Images with Digital Filters
Base Parameter Adj
Extract Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Tone Expansion
Sketch
Water Color
Pastel
Posterization
Miniature
Soft
Starburst
Fish-eye
Slim
To Next Page
Loading...
