1
17
Introduction
• The AF point in use for autofocus appears in red
(Superimpose AF Area) when the shutter release button
is pressed halfway. You can set it to [Off] in [14. Superimpose
AF Area] of the E2 menu.
• You can adjust the viewfinder
image sharpness using the diopter
adjustment dial. Adjust the diopter
setting until the AF frame in the
viewfinder looks sharp and clear.
t Memo
• You can change the LCD panel backlight setting in [21. LCD
Panel Illumination] of the E3 menu. (p.28) You can also set
the camera so that the LCD panel illumination turns on or off
when P is pressed. (p.80)
You can check whether the camera is tilted by displaying
the electronic level. The electronic level for the horizontal
camera angle can be displayed in the EV bar scale in the
viewfinder and on the LCD panel, and the electronic levels for
the vertical and horizontal camera angles can be displayed
on the Live View screen. (p.11)
Select whether to display the electronic level in [Electronic
Level] of the A3 menu. (p.21)
LCD Panel
1 Shutter speed 11 Wireless LAN
connection (p.86)
2 Multi-exposure (p.53)
3 Aperture value 12 Battery level
4 Mirror Lock-up Shooting
(p.53)
13 GPS turned on (p.63)
14 Sensitivity (p.43)/EV
Compensation (p.41)5 AE Metering (p.44)
6 Focusing area (AF point)
(p.47)
15 Flash Mode (p.45)
16 Drive Mode (p.50)
7 Flash Exposure
Compensation (p.45)
17 Card slot number
18 File Format (p.39)
8 EV bar scale/Electronic
Level (p.17)
19 Remaining image
storage capacity/USB
connection mode (p.72)/
Sensor cleaning in
progress (p.94)
9 EV Compensation
(p.41)/Exposure
Bracketing (p.52)
10 HDR Capture (p.60)
3
1
2
4
10
11
12
13
14
67 8 9
191716
5
15 18
Electronic Level
To Next Page
Loading...
