5
Settings
80
3 Press D and use AB to select the functions
to assign.
The following functions can be assigned to each button.
4 Press E.
5 Press F.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
6 Press F twice.
u Caution
• [LCD Panel Illumination] in [RAW/Fx Button] cannot
be selected when [21. LCD Panel Illumination] is set
to [Off] in the E3 menu.
Select the file format to change to when P is pressed for
each [File Format] setting.
1 Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of “Setting the Button Operation” (p.79).
2 Select T or S for [Cancel after 1 shot].
3 Select the file format when
P is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when P
is pressed.
Setting Function Page
RAW/Fx
Button
One Push
File Format
Temporarily changes
the file format.
p.80
Exposure
Bracketing
Sets Exposure
Bracketing.
p.52
Optical
Preview
Activates the Optical
Preview function.
p.49
Digital
Preview
Activates the Digital
Preview function.
Shake
Reduction
Turns the Shake
Reduction and Movie
SR functions on/off.
–
LCD Panel
Illumination
Turns the LCD panel
illumination on/off.
p.17
AF Button
Enable AF1
Autofocus is performed
when I is pressed.
p.46
Enable AF2
Autofocus is performed
when I is pressed.
Half press of the shutter
release button
is disabled.
Cancel AF
While I is pressed,
half press of the shutter
release button
is disabled.
Preview
Dial
Optical
Preview
Activates the Optical
Preview function.
p.49
Digital
Preview
Activates the Digital
Preview function.
Setting the One Push File Format
T
The recording format returns to the [File Format]
setting of [Image Capture Settings] in the A1 menu
after a picture is taken.
S
The setting is retained until any of the following
operations is performed:
• When P is pressed again
• When 3, F, or G is pressed, or when the
mode dial or main switch is turned
To Next Page
Loading...
