6
95
Appendix
Not enough battery power
remaining to activate Pixel
Mapping These messages appear when you try
to perform Pixel Mapping or Sensor
Cleaning, or to update the firmware if the
battery level is insufficient. Install a fully
charged battery.
Not enough battery power
remaining to clean sensor
Not enough battery power
remaining to update the
firmware
Unable to update firmware.
There is a problem with the
firmware update file
Unable to update the firmware.
The update file is damaged.
Try downloading the update file again.
Image folder cannot
be created
The maximum folder number (999)
is being used, and no more images can
be saved. Insert a new memory card
or format the card.
Unable to store image
The image could not be saved because
of a memory card error.
The operation could not be
completed correctly
The operation failed. Try the operation
again.
No more images
can be selected
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
• Image Copy
• Index
• RAW Development
• Protect
• Eye-Fi Image Transfer
No image can be processed
There are no images that can
be processed using the Digital Filter
or RAW Development function.
This image cannot
be processed
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
Development, or Save as Manual WB for
images captured with other cameras,
or when you try to perform Resize
or Cropping for minimum file size images.
The camera failed
to create an image
Failed to create an index print image.
Error Messages Description
This function is not available
in the current mode
You are trying to set a function that
is not available for the exposure mode
that is set.
The camera will turn off
to prevent damage from
overheating
The camera will turn off because its
internal temperature is too high.
Leave the camera turned off until it has
had time to cool down before turning
on the camera again.
Set the Eye-Fi
communication to "SELECT"
Images cannot be transferred when
[Action Mode] is not set to [SELECT]
in [Wireless Memory Card] of the
D3 menu. (p.86)
Image not found
There are no images that can be
transferred when an Eye-Fi card is used.
Cannot be selected
This folder cannot be selected because
the number of files exceeds the maximum
number allowed.
Shutter release is disabled.
Ensure the zooming index
on the lens is set to a position
that permits shutter release
Pictures cannot be taken when
a retractable lens is attached and
is no extended. (p.37)
Error Messages Description
e_kb570_om.book Page 95 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
