Ricoh pentax KP - Using the Smart Function; Using the Control Panel

1
Introduction
21
You can easily change settings with
two dials: the function dial and the
setting dial. Use the function dial (1)
to select the desired function, and
use the setting dial (2) to change its
setting value.
The following functions can be selected.
You can assign functions to C1, C2, and C3 in [Button
Customization] of the A5 menu. (p.105)
The assigned functions can be
checked on the status screen or Live
View screen when the function dial or
setting dial is turned.
Press G in standby mode.
t Memo
• The functions that can be selected vary depending on the
current camera settings.
• If no operations are made within approximately 1 minute
while the control panel is displayed, the camera returns to
standby mode.
Using the Smart Function
Function
Dial
Function Page
R Disables the setting dial operation. –
AE Changes the AE Metering method. p.57
HDR Changes the capture type of HDR Capture. p.77
CH/CL
Changes the shooting speed for
Continuous Shooting.
p.65
C1
Changes the image finishing tone for
Custom Image (default setting).
p.74
C2
Changes the capture type of AA Filter
Simulator (default setting).
p.79
C3
Changes the brightness of the monitor
(default setting).
p.108
1
2
99 999
99999
Custom Image
Custom Image
Using the Control Panel
999 9999999
999 9999999
10:2310:23
CancelCancel
OKOK
02/02/201702/02/2017
HDR CaptureHDR CaptureHDR Capture
Off
OffOff
HDR Capture
HDR CaptureHDR Capture
Off
OffOff
Use R to change settings.
Press E to make detailed
settings.
Use ABCD to select an item.
Press F to
cancel the setting
operation.
Press E to confirm the selected item
and return to the control panel.
Use R to change settings.
Use AB to switch between
items.