3
Shooting
75
When [Cross Processing] is set to [Random], the outcome
varies each time a picture is taken. If a cross processed image
that you like is taken, you can save the Cross Processing
settings used in the image so that you can repeatedly use the
same settings.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Select [Save Cross Processing] and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select the “Favorite” number 1, 2, or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.74), and selecting one of the Favorite settings 1 to 3 for the
parameter.
1 Select [Digital Filter] in the A3 or C2 menu and
press D.
The Digital Filter setting screen appears.
2 Select a filter.
Select [No Filter] to not shoot with
a digital filter.
Available operations when shooting with the
viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
3 Press G.
The parameter setting screen appears.
Saving the Cross Processing Settings of a
Captured Image
100-0001
Saves this image's Cross
Processing settings
Save as Favorite 1
Save as Favorite 2
Save as Favorite 3
Cancel
OK
Digital Filter
A3/C2
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
X Uses Digital Preview to preview the
background image with the selected setting
applied.
Z
Saves the preview image (only when the
image can be saved).
Extract Color
Cancel
Parameter Adj.
Check
OK
To Next Page
Loading...
Need help?
General
