Ricoh pentax KP - Setting the Exposure; Playing Back Movies; Sensitivity

3
Shooting
54
1 Display the movie to play
back in single image
display of the playback
mode.
Available operations
t Memo
• The sound volume at the start of movie playback can be set
in [Playback Sound Volume] of the B1 menu. (p.31)
• In [Movie Edit] of the playback mode palette, a movie file can
be divided into multiple segments or selected frames can be
deleted. (p.89)
1 Press A in standby mode.
The sensitivity setting screen appears.
In H, K, L, or M mode, proceed to Step3.
2 Use AB to select [ISO
AUTO] or [ISO].
3 Use Q or R to change the value.
4 Press E.
The camera returns to standby mode.
t Memo
• The adjustment steps for ISO sensitivity is 1 EV step. To
adjust the sensitivity in accordance with the EV step setting
for the exposure, set from [2 Sensitivity Steps] of the E1
menu.
• When the sensitivity is set to ISO 102400 or higher, ISO value
is displayed in the viewfinder by a combination of the letter “H”
and a three-digit number (e.g., ISO 102400 = H102).
Playing Back Movies
A Plays back/pauses a movie.
D Forwards a frame (when
paused).
Press and hold D Fast-forwards playback.
C Reverses a frame (when
paused).
Press and hold C Fast-reverses playback.
B
Stops playback.
R
Adjusts the sound volume (21
levels).
Z Saves the displayed frame as a
JPEG file (when paused).
G Switches between [Standard
Information Display] and [No
Information Display].
10'30"10'30"
100-0001100-0001
Setting the Exposure
Sensitivity
ISO AUTO Sets the upper limit and lower limit.
ISO
Selects a sensitivity value from ISO 100 to
ISO 819200.
64 00
6400
10 0
100
10 0
100
-
-
1/
250
1/
250
F5.6
F5.6
0.0
0.0
Cancel
Cancel
OK
OK