Ricoh pentax KP - Bracketing

3
Shooting
66
You can take multiple images at different exposure levels.
1 Select T on the Drive
Mode screen and press B.
2 Use CD to select T or 1.
Proceed to Step 6 when T is selected.
3 Press G.
4 Select a self-timer mode.
5 Press E.
The screen of Step 1 reappears.
6 Set the number of shots and bracket value.
Available operations
7 Press E.
The camera returns to standby mode.
8 Shoot.
After pictures are taken, the camera returns to standby
mode.
t Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E1
menu.
• The following settings for Bracketing can be set in the E2
menu.
• When [Bracket Value] is assigned to the function dial, you can
change the bracket value using the Smart Function. (p.21,
p.105)
Bracketing
T Bracketing
1 Bracketing + Self-timer
Q
Sets the number of shots.
R
Changes the bracket value.
JR
Adjusts the exposure compensation
value.
M
Resets the adjustment value to the
default setting.
±0.3E V
±0.3EV
x3
x3
Bracketing
Bracketing
Cancel
Cancel
OK
OK
Reset
Reset
Bracketing
Bracketing
Self-timer
Self-timer
Cancel
Cancel
OK
OK
9 Bracketing Order
Changes the shooting order of
pictures.
10 One-Push Bracketing
Takes all pictures with one
release of the shutter.