EasyManuals Logo

Ricoh pentax KP User Manual

Ricoh pentax KP
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
3
Shooting
50
t Memo
The settings for the exposure can be specified in increments
of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can
change the adjustment steps to 1/2 EV steps.
•In L mode, the difference from the correct exposure is
displayed on the EV bar scale while the exposure is adjusted.
For each exposure mode (excluding M mode), you can set
the camera operation for when Q or R is turned or M
is pressed. Set in [E-Dial Programming] of [Button
Customization] in the A5 menu. (p.106)
•In I or J mode, you can take pictures while automatically
changing shutter speed and aperture value. (p.67, p.68)
u Caution
The correct exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is fixed
at a certain sensitivity.
When shooting with a slow shutter speed, you can reduce
image noise in [Slow Shutter Speed NR] of [Noise Reduction] in
the A2 menu.
In [Program Line] of the A1 menu, you can specify how the
exposure is controlled.
t Memo
The Program Line setting is enabled in the following
situations.
•In G or H mode
When
G
LINE is set for the
M
operation of
K
or
L
in [E-
Dial Programming] of [Button Customization] in the
A
5 menu
When [Program Line] is assigned to the function dial, you can
change the setting using the Smart Function. (p.21, p.105)
Reducing Noise when Shooting with a
Slow Shutter Speed
A2
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Off Does not apply Noise Reduction at any shutter speed.
Setting the Exposure Control Method A1
A Auto Determines the appropriate settings.
B Standard
Sets to the basic program automatic
exposure (all-around mode).
C
Hi-speed
Priority
Prioritizes high shutter speeds.
D
DOF Priority
(Deep)
Closes the aperture for a deep depth of
field.
E
DOF Priority
(Shallow)
Opens the aperture for a shallow depth of
field.
F MTF Priority
Sets the sharpest aperture of the attached
lens when a DA, DA L, D FA, FA J, or FA
lens is used.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh pentax KP and is the answer not in the manual?

Ricoh pentax KP Specifications

General IconGeneral
BrandRicoh
Modelpentax KP
CategoryDigital Camera
LanguageEnglish

Related product manuals