OPTIONAL FUNCTIONS
Adjusting the image position to the right or left
c1 The image position can be shifted up to about 10 mm, 2/5” each way.
division on the scale is 2 mm, 0.08”.
n If your machine is equipped with the optional sorter stapler, the image
tion is shifted to 3 mm, 0.12“ for each division on the scale.
Shifting the image to the right
D
Press the LCT image
switch as shown in the
tion.
Shifting the image to the left
posi-
position I ,, ,
II
“illustra-
II
Press the LCT image position
switch as shown in the illustra-
tion.
To Next Page
Loading...
