Ricoh Priport VT3800 - Printing on Thick or Thin Paper

OPERATION
Printing On Thick Or Thin Paper
When you make prints on thick (127.9 to 209.3 g/m2, 34 to 55.6 lb) or
thin (47.1 to 81.4 g/m
2, 12.5 to 21.6 lb) paper, perform the following
steps.
Printing on thick paper
El
o
0
El
o
0
When you
than 127.9
lighter than
use paper
g/m2, 34.0
209.3 g/m2,
heavier
lb and
55.6 lb,
position the pressure lever (A)
to the Thick paper position.
When you use paper heavier than
64 g/m2, 17 lb and lighter than
157.0 g/m2, 41.7 lb, position the
pressure lever (A) to the standard
position.
In the case of paper smaller
B5, 51@’ x 81/2” and heavier
81.4 g/m2 (21.6 lb), move the
roller pressure lever to the Thin
per position.
Push the pressure levers
down.
There are two pressure levers
Make sure that both levers
down.
If dog-eared or wrinkled prints
delivered, push the levers up.
than
than
feed
pa-
(B)
(B).
are
are