DAILY MAINTENANCE
Separation Roller (Optional Document
Feeder)
Clean the separation roller with
a damp cloth and wipe it with a
dry cloth.
n
If you do not clean the separation
roller, original misfeeds tend to oc-
cur.
Sheet (Optional Document Feeder)
Clean the sheet with a damp
cloth and wipe it with a dry
cloth.
n
If you do not clean the sheet,
marks
on the sheet will be printed.
Paper Size Detection
Table)
Wipe off the paper dust on
o
Sensors (Paper Feed
the
paper size detection sensors
with a dry cloth.
If you do not clean the paper size
detection sensors, parts of the im-
age will not be printed.
OPTIONAL FUNCTIONS
Setting stapling after printing (Manual Staple Mode)
D
When you set originals on the
exposure glass, follow the steps
1 through 10 on pages 80, 81
and 82.
When you set originals in the
---1
A---
To Next Page
Loading...
