CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
How to use user code mode
c1
Input your assigned 3-digit user
code using the Number keys,
then press the Enter key.
H
Make your prints.
El
After you have finished, press
the Stop key while pressing the
Clear Modes key.
o This prevents others from using
your user code to make prints.
o
If you do not follow this step, the
machine will not request the next
user for their codes unless the auto
reset time has expired.
141
OPTIONAL FUNCTIONS
J
, Press the Master Making key.
Then, make your prints.
To Next Page
Loading...
