PREPARING IMAGE MAKE-UP
How To Make A Command Sheet
There are two ways of designating areas: the diagonal line method and
the closed area method.
When using the diagonal line method
CI A diagonal line must be drawn through the area corresponding to what you
want to edit.
El
El
rl
Put the command sheet on top
of the original.
Draw a line using a felt tip pen
(black, red or blue) with a thick-
ness of at least 2
mm, 0.08”,
making sure there is no break
in the line.
The diagonal line can be drawn
from left to right or vice versa.
Draw the line at least 2 mm,
0.08”, away from the image so
that the complete image can be
recognized.
To Next Page
Loading...
