REPLENISHING SUPPLIES
Adding Staples
The Staple (h%) and “H” indicators blink when the optional sorter stapler
runs out of staples. When your machine is equipped with the 2 sorter
staplers, A or B is indicated at the end of second line of the guidance
display. If A is indicated, the sorter stapler next to the main frame has
run out of staples.
A Caution:
Do not remove the staple cartridge from the stapler except for
adding staples.
D Do not remove staple plate. It should remain in the stapler unit when you
remove the empty staple cartridge.
c1
El
El
n
Open the stapler unit cover.
I
Iil”!l
II
Lift the empty staple cartridge a
little and remove it from the sta-
pler unit.
Set the new staple cartridge
I
I /A1I
It
OPTIONAL FUNCTIONS
H
Loosen the screws of the side
plates.
To Next Page
Loading...
