CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
Service Program Menu
SP No.
Mode
Function
Specifies the minimum number of prints that
10
Minimum Print
can be input with the Number keys.
Quantity
a Default: O
a Adjustment value:
o to 9999
Specifies the maximum number of prints that
11
Maximum Print
can be input with the Number keys.
Quantity
a Default: O
0 Adjustment value:
o to 9999
Adjusts a fixed magnification ratio.
metric version: from A4 to A3
inch version: from
51/2” x 81/2”to 8112”x 14“
12
CJ Default: metric version: 141
‘/0
inch version: 155 $YO
CI
Adjustment value:
50 to 200 ?40
Adjusts a fixed magnification ratio.
metric version: from A4 to B4
inch version: from 81/2” x 11“ to 11“ x 17”
13
n Default: metric version:
122
‘/0
Fixed Magnification
inch version:
129
yO
Ratio Adjustment
n Adjustment value:
50 to 200 ?40
Adjusts a fixed magnification ratio.
metric version: from B4 to A3
inch version:
from 8112”x 14“ to 11” x 17“
14
CI Default:
metric version: 115%
inch version:
121
?40
D
Adjustment value:
50 to 20070
Adjusts a fixed magnification ratio.
metric version: full size
inch version: from 81/2” x 14” to 81/2”x 11”
15
n Default: metric version: 100940
inch version: 77
?40
CI
Adjustment value: 50 to 20070
130
OPTIONAL FUNCTIONS
Printing using the paper cassette for LCT
If you are making prints using the optional large capacity tray, you can
change the paper size temporarily by using the paper cassette for LCT.
o Maximum paper capacity is as follows:
500 sheets (64 g/m2, 17 lb)
400 sheets (80 g/m2, 20 lb).
Loading paper
To Next Page
Loading...
