REPLENISHING SUPPLIES
Placing A New Roll Of Tape In The Tape
Dispenser (Option)
rI
Make sure that the main switch is turned on and the tape power switch is off.
El
El
c1
El
c1
Open the cover of the tape dis-
penser.
As shown, put the roll in the
dispenser.
Make sure that the tape is installed
in the proper direction. If it is not in
the correct direction, the tape dis-
penser will not work correctly.
Feed the leading edge of the
roll in the dispensing slot until it
stops.
Push the tape as far as possible
through the slot.
154
To Next Page
Loading...
