Ricoh Priport VT3800 - Page 137

CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
3P No.
Mode
Function
When you make prints in Photo or Line/Photo
mode, the background of the prints may
become dirty. You can prevent this using this
29
Photo Background function
Correct
o Default: O
~ Adjustment value:
O: No 1: Yes
Specifies the image mode at power on.
D Default: O
40
Image Mode
Default setting
~ Adjustment value:
O: Line mode
1: Line/Photo mode
2: Photo mode
Specifies the image density at power on.
n Default: 1
41
Image Density
~ Adjustment value:
Default setting
O: Light
1: Standard
2: Dark
3: Darker
ISpecifies whether Auto Cycle mode is
43
Auto Cycle Mode
selected at power on.
Default setting
o Default: O
~ Adjustment value:
O: No 1: Yes
Specifies Memory or Class mode at power on.
Memory/Class
o Default: 1
44 Mode Default
setting
~ Adjustment value:
O: Class
1: Memory
132
OPTIONAL FUNCTIONS
n
, Press the Down key.
;