HOW TO USE IMAGE MAKE-UP MODE
Photo Mode (One Command Sheet)
Press the Make-up key.
If you want to leave Make-up mode
at any time press the Make-up key
again.
Using the Number keys, select
Image Make-up mode (Fn4 or
Fnl 4) for the designated area.
(= See page
5).
Press the Enter key.
If
a Fn No. (command number)
was entered previously and re-
mains in memory,
press the Cl-
key.
The commands entered previously
are stored in memory until
main switch is turned off or
Clear Modes key is pressed.
Press the Enter key again.
the
the
19
To Next Page
Loading...
