89
113
HOW TO USE IMAGE MAKE-UP MODE
Using the Number keys, select
the background pattern number
(1 - 40, 51 - 90, 101 - 140,
151 -190) .(* Seepage 7.)
Press the
Enter key.
If a Fn No. (command number)
was entered previously and re-
mains in memory, press the Clear
key.
Commands entered previously are
stored in memory until the main
switch is turned off or the Clear
Modes key is pressed.
Press the Enter key again.
Using the Number keys, select
the Image Make-up mode for
the outside area. (= See page
6.)
Fnl ...
Line mode
Fn2 ... Outline mode
Fn3 ...
Deiete mode
Fn4 ... Photo mode
23
-----1
u=laulk. u
Adjustment value:
O: Memory/Class mode
1: Auto Memorv/Class mode
Reproduce tint image.
Tint mode setting
~ Default: O
0 Adjustment value:
O: No 1: Yes
Resettabie Total
Used to display the total number of masters
Master/Copy
and prints.
Counter
D M: Total number of masters
P: Total number of Prints
Clears the resettable total master/copy
To Next Page
Loading...
