HOW TO USE IMAGE MAKE-UP MODE
H
o
0
c!
i
c1
Set the command sheets and
original face
down into the
document feeder.
Make sure that the command
sheets are set under the original
when you use the 20 originals
document feeder.
Make sure that the original is set
under the command sheets when
you use
the 50 originals document
feeder.
Press the
Master Making key.
If a command sheet or an original
misfeeds, remove the misfed com-
mand sheet or original and reset it
into the document feeder. It is not
necessary to reset the previous
command sheets or original.
30
(
128
To Next Page
Loading...
