OPERATION
Zoom
In this mode, the reproduction ratio can be changed from 50 YO to 200
70 in 1 70 steps.
c1
El
El
Press the Zoom down (-) key
repeatedly to reduce the ratio in
1 ?40steps.
or, press the
Zoom Up (+) key
repeatedly to increase the ratio
in 1
0/0 steps.
Make sure that
the print paper
size.
the original and
are the correct
Set your originals
sure glass or in
document feeder.
on the expo-
the optional
rl
, Press the Master Making key.
Check the image position of the
trial or proof print.
J
If the image position is not correct,
adjust it
using the Image Position
keys (= see page
21) or the side
plate fine adjusting dial (~ see
page 22).
El
Make your prints.
30
Print Start
.
To Next Page
Loading...
