OPERATION
n
t
b
o
El
9
0
Set the first original face down
on the exposure glass.
Set originals one sheet at a time in
the same order that you stored
them in memory.
Press the
Master Making key.
Check the image position of the
trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys (~ see page 21) or the side
plate fine adjusting dial (~ see
page 22).
m
, Turn on the power switch of the
optional tape dispenser.
M
Press the Auto Cycle key.
o
If you press the Auto Cycle key,
you cannot make proof prints by
pressing the Proof key.
To Next Page
Loading...
