OPTIONAL FUNCTIONS
Stapling prints (Staple Sort mode)
L
After prints are sorted into sets, they are stapled automatically.
o
The original set direction and the
staple
shown
position of the prints are as
in the illustration.
~ For Stapling, the following
limitations apply:
IGU Iv VGI=IUI 1.
Paper size
A3D, B4D, A4QD, B5D.
Paper weight
64-82 g/m2
64 g/m2:
2-50 sheets
Stapler capacity
75 g/m2:
2-42 sheets
80 g/m2:
2-40 sheets
Maximum number
20 sets (per sorter stapler)
of sets
D Roughly-cut paper
Paper that cannot
o Paper of different thickness in the same
be used
D Buckled or curled paper
fl Short grain paper
To Next Page
Loading...
