Solution:
When the paper width direction is not aligned neatly
1. In the [Finishing: Finisher 2] group of [Adjustment Settings for Operators], select 0701:
[Paper Alignment for Stapling: Across Feed] and adjust the width of the paper alignment
jogger for stapling.
Use [ ] to increase the width, and [ ] to decrease the width.
1st and 2nd sheets are misaligned.
1. In the [Finishing: Finisher 2] group of [Adjustment Settings for Operators], set 0707:
[Number of Sheets Align for Stapling] to -1 sheet.
5. Post-Processing Option Troubleshooting
140
To Next Page
Loading...
