Increase the value in [Fan Level] to 80%.
• If the present value is 80%:
Increase the value in [Fan Level] to 100%.
11. Is the problem resolved?
Yes Finished!
No Contact your service representative.
• For details about how to loosen paper, see "Loading Paper" in "Preparation".
Vertical lines and scratches occur at random positions
Cause:
Due to accumulated paper dust and paper rubs, fine lines or scratches may occur in the ejecting
direction and parallel direction.
Solution:
Clean the guide plate inside the interposer.
For details about how to clean the interposer, see page 106 "Cleaning the Paper Feed Path".
Interposer
175
To Next Page
Loading...
