• When you set [Registration Jam Detection with Feed Direction] to [Off], the printed image may
become misaligned at the leading edge.
If (J082) Appears
Cause:
This may occur if:
• When printing on a paper with rigidity of Paper Weight 5
• When printing on a paper with rigidity of Paper Weight 6 or more
• When printing on a paper with high smoothness such as coated paper
• When printing on a paper of B5 , A4 , or 8
1
/
2
11
Solution:
1. Is it possible to pull out the drawer unit inside the main unit and operate the lever of the
paper transfer unit?
Yes Go to the next step.
No Contact your service representative.
2. Open the front cover, then pull out the drawer unit.
The lever is located in the recess of the drawer unit.
4. Troubleshooting Paper Delivery Problems
78
To Next Page
Loading...
