Ricoh Pro 8300S - Page 46

Affected area Solution
The center is
fainter or denser
cez558
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists,
contact your service
representative.
Wavy
unevenness
cez559
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists,
contact your service
representative.
(C) The density is uneven in the direction perpendicular to the paper feed direction at regular
intervals.
Affected area Solution
Periodic vertical
density fluctuation
CWH402
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists, see
page 51 "Periodic
Density Fluctuation".
3. Troubleshooting Image Quality Problems
44