Trailing edge of stapled sheets close to the paper exit.......................................................................... 138
Sheets cannot be stapled properly.......................................................................................................... 139
Finisher SR5110/Booklet Finisher SR5120................................................................................................141
Delivered Sheets Are Not Stacked Properly...........................................................................................141
Large Delivered Sheets Are Not Stacked Properly................................................................................ 142
Trailing edge of stapled sheets close to the paper exit.......................................................................... 144
Sheets cannot be stapled properly.......................................................................................................... 146
The Edge Is Rolled.....................................................................................................................................146
Carbonless Sheets Are Not Stacked In an Aligned Manner.................................................................148
Stitching missing, incorrect stitching position, ear-fold, or misaligned occurs......................................151
Paper is stained..........................................................................................................................................151
Paper jam occurs on thin coated paper of Paper Weight 2 or less...................................................... 152
Scratches on the edge of the stapled paper occur.................................................................................153
Paper jam occurs while saddle stitching..................................................................................................153
Multi-Folding Unit.......................................................................................................................................... 155
Inaccurate Folding (Folding Deviation)...................................................................................................155
Folding Deviation...................................................................................................................................... 156
Folds soiled by multi-sheet folding...........................................................................................................161
Edges of letter fold bent............................................................................................................................ 162
Z-Folding is Not Performed Properly.......................................................................................................164
Folded Sheets Are Not Stacked Properly................................................................................................165
High Capacity Stacker.................................................................................................................................. 167
Delivered Sheets Are Severely Curled.................................................................................................... 167
The Machine Wrongly Detects That the Tray Is Full............................................................................... 169
The Paper Press Leaves an Impression on the Paper..............................................................................170
Paper Pressed Down Insufficiently........................................................................................................... 171
Paper of Paper Weight 1 does not align correctly.................................................................................171
Interposer........................................................................................................................................................173
Paper jam due to paper misfeeding or double feeding occurs.............................................................173
Vertical lines and scratches occur at random positions..........................................................................175
6. Improving Throughput
Reducing the Waiting Time Prior to Printing................................................................................................ 177
4
To Next Page
Loading...
