Paper weight Curl amount
Paper Weight 9
Face curl: 10 mm
Back curl: 0 mm
Correcting curl
1. Place the curled surface down on a flat surface.
2. Hold the end of the paper and straighten it in the opposite direction to the curl direction so that
the paper is rounded.
Adjust the separation pressure level.
Each of trays 1 to 3 is provided with a separation pressure adjuster, which can be set to one of three
separation pressure levels.
• A: Default position
• B: Level 2
• C: Level 3
Set the separation pressure level according to how often paper misfeeds occur (J003 to J005, J010 to
J012).
4. Troubleshooting Paper Delivery Problems
90
To Next Page
Loading...
