Affected area Solution
The top and
bottom are fainter
or denser.
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists,
contact your service
representative.
(B) The density is uneven in a part of the image.
Affected area Solution
The leading edge
is fainter.
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists, see
page 46 "Fainter
Leading Edge".
The trailing edge
is fainter.
1. In the [Main Unit: Image
Quality] group on the
[Adjustment Settings for
Operators] menu, select
0202: [Adjust Image
Density] and execute
[Adjust Image Density].
2. If the problem persists, see
page 48 "Fainter
Trailing Edge".
Density Problems
43
To Next Page
Loading...
