!
sizes for the paper tray. In addition, set a side fence extension according to paper side on
an extension of the side fence.
(7) When you load a paper that is 420.0-559.9 mm (16.54–22.00 inches) wide, use two short-
end fences. When you load a paper that is 560.0-700.0 mm (22.00–27.55 inches) wide,
use one long-end fence to fit to the paper length.
◎ When feeding paper with [paper weight 8] or above
When feeding a paper with paper weight 8 or above, set the attached base in the LCT and
then load the paper.
Set the base so that spaces in the center of the paper feed corner are covered.
Short-end fences
Side fence extension
Side fence extension
Long-end fence
Base to use when
feeding a thick pa-
per of 300.1g/㎡ of
To Next Page
Loading...
