!
(5) When the screen goes back to the [Adjustment Settings for Operators] screen, select
[10 : Density Difference Printing: Across Feed] and the tray to adjust, then press [Exe-
cute].
When the screen changes to the confirmation screen after adjusting the density, press
[Apply].
Do not open trays while adjusting.
Caution: To adjust all tones in a balanced manner, select "Initial value" If the color with density
unevenness is "low tone", set "small value", and set "large value" for "high tone". For
details, see "Density Difference Printing: Across Feed" in the "Notes for Users".
Executing "Smooth Fusing Belt"
If you print a large amount of small size paper and then print on a slightly larger size paper (for
example, print a postcard and then print A3 elongated size), the print may appear to have
streaks at intervals of the small size paper width that you printed earlier. In such cases, execute
"Smooth Fusing Belt".
(1) Press the [Adjustment Settings for Operators] button on the operation panel of the ma-
chine.
To Next Page
Loading...
