Photoconductor unit-to-Belt Transfer
Photoconductor unit-to-Belt Transfer
Among the following two print modes, the correct mode is selected automatically according to the print
data sent from the printer controller.
• BW mode: Job contains only black data.
• FC mode: Job contains color data.
12 3
BW
FC
Print
mode
Engine status
(Stations greyed out are inactive.)
Paper
Paper
YMC
Y M
C
K
K
DZH308
1. Photoconductor unit
2. Image transfer roller
3. Intermediate transfer belt
By applying a positive (+) bias (transfer voltage) to the image transfer roller, negatively charged toner
(-) on the photoconductor unit is attracted to the intermediate transfer belt that positions between the
roller and the belt. Any remaining toner on the photoconductor unit is cleaned by the PCU cleaning unit.
Related Advanced Settings
page 34 "Image Transfer Output"
2. Printing Process
10
To Next Page
Loading...
