Function
In this mode, you can change the paper transfer belt line speed in order to minimize the difference
in the side-to-side magnification between those covering high image and low image areas.
When to use
Use this if image degradation occurs after executing [Image Magnification: Across Feed] and you
wish to restore the machine to the previous state.
Adjust Paper Curl (Fusing)
1341 [Adjust Paper Curl (Fusing)]
Function
Sets whether to correct the warp (curl) of paper in fusing.
When to use
Paper curling due to fusing may be solved by executing paper curling adjustment (fusing).
Interposer
1351 [Interposer]
Function
Fan Setting: Set the fan operation of Interposer.
Fan Level: Adjust the fan level of Interposer to make paper part easily.
When to use
Adjust the fan level if misfeeds or double-feeds occur frequently.
Related Troubleshooting
• Paper Misfeeds or Double-Feeding
For detailed procedure, see the Troubleshooting manual.
Finisher: Output
1361 [Finisher: Output]
Function
Set the jogger action of the Finisher Shift Tray. If [On] is set, the paper ejection jogger operates to
align the paper across the feed direction.
When to use
If set to [On], the jogger of the finisher shift tray aligns the sheets in the direction of the paper width.
Paper Feed/Delivery
55
To Next Page
Loading...
